Skip to content

Component overview

ReMoni’s solutions consist of multiple sensors which communicate wireless though the ReMoni Gateway with our cloud platform ReCalc or ReCalc MoniTor where you access your data, set up alarms, etc.

The sensors are clamped non-invasively on the outside of existing cables and pipes, etc. to ease installation.

ReCalc run self-learning alarms, data storage, user interfaces and an API for integration with other solutions.

All ReMoni’s products are built to be long-lasting and for avoidance of battery replacement. All our products are tested individually before being shipped from the factory and have been designed, developed and produced in Denmark.

How does it work?

In short, the sensors contain a data-logger that sends data wirelessly to the cloud platform ReCalc through ReMoni’s gateway. 

ReCalc run self-learning alarms, data storage, user interfaces and an API for integration with other solutions. All ReMoni’s products are built to be long-lasting and for avoidance of battery replacement.

All our products are tested individually before being shipped from the factory and have been designed, developed and produced in Denmark.

The components

PowerMoniSpot power sensor

PowerMoniSpot

PowerMoniSpot is mounted on the outside of multiconductor power cables of your units or devices to start monitoring. It is much easier to install than other sensors on the market since it is simply mounted directly onto the existing cables.

PowerMoniMain

PowerMoniMain

Our CT-based power sensor for mounting inside switchboxes. PowerMoniMain is clamped onto existing wires in the switchbox by CT-clamps and wires, enabling precise measurements of current, voltage and power.

PowerControllerTemp

PowerControllerTemp intelligently controls the heating of a building to reduce energy consumption. It has a built-in Gateway for seamless transmission of data to the cloud, as well as advanced security features.

FlowMoniVolume

FlowMoniVolume measures flow (m3) and temperature (C) on plastic pipes without the need of cutting into the pipe. It is a safe solution that minimizes the risk of leaks.

GateWay

The ReMoni GateWay is routing data from sensors to ReCalc, and parameter settings from ReCalc to the sensors. The gateway can receive data from up to 500 sensors. When more gateways are used, they will distribute the signals from the sensors themselves. 

AirMoniGateway

The AirMoniGateway is equipped with a sensor package that measures the air’s content of CO2 (ppm), temperature (°C) and humidity (%). This allows for observation and improvement of comfort in offices, classrooms, conference rooms, etc.

HeatMoniSpot

TempMoniSpot

TempMoniSpot is an temperature sensor with two external and one internal temperature measurement point. By monitoring the supply and return temperatures of your cooling and heating pipes with TempMoniSpot you can identify if the cooling is too low, resulting in costly transmission losses.

TempMoniDC

With TempMoniDC you get a unique combination of 7 channels, 3 temperature and 4 analog signals (VDC), as well as the data is stored directly in the cloud.

ReCalc MoniTor Ventilation Basic

ReCalc MoniTor

Save money and resources on energy consumption in buildings with ReCalc MoniTor.

ReCalc datavisning

ReCalc

ReCalc is the online platform where you have access to all your data. Get a quick overview of the many features and possibilities.