Investment for flow sensor

💰💰💰💰💰💰 DKK 13.6 million 💰💰💰💰💰💰

“It is powerful that Kenneth Iversen and Innovation Fund Denmark join forces to invest in green technology for easy and inexpensive measurement of flow. All parties will have a better investment and we will benefit from the necessary transition to address the climate crisis.”

– Bo Eskerod Madsen, CEO of ReMoni

Read more about the investment in ReMoni’s development of ultrasonic flow measurement in TechMedia A/S article in Technical News: Link

Investering til flowmåler

💰💰💰💰💰💰 13,6 mio. DKK 💰💰💰💰💰💰

”Det er stærkt, at Kenneth Iversen og Innovationsfonden går sammen om investering i grøn teknologi til nem og billig måling af flow. Alle parter får en bedre investering, og vi gavner den nødvendige omstilling til at imødegå klimakrisen.”
– Bo Eskerod Madsen, CEO i ReMoni

Læs mere om investeringen i ReMonis udvikling af ultralydsflowmåling i TechMedia A/S artikel i Teknisk Nyt: Link

Tekniker til Green-tech optimering af bygninger og produktion

Jobopslag tekniker

Opdateret: Stillingen er besat.

Forestil dig at hjælpe danske kommuner og virksomheder med at gøre en seriøs forskel for den grønne omstilling – og spare penge samtidig.

Dét er opgaven som tekniker og montør hos ReMoni.

Tekniker til Green-tech optimering af bygninger og produktion

 

Den patenterede ReMoni-teknologi sikrer energi- og ressourceoptimering i bygninger og produktion. Vi leverer en løsning til vores kunder hvor vi dokumenterer både gevinsterne og den korte tilbagebetalingstid vha. konkrete målinger af effekten af det enkelte tiltag.

Jobbet:

Du vil arbejde med at spare på vores fælles ressourcer til gavn for klima og miljø, gennem:

  • Installation af ReMoni teknologien hos kunderne.
  • Optimering og fejlfinding på de tekniske installationer i kundens bygninger og produktions-faciliteter vha. resultaterne fra den løbende monitorering med ReMoni løsningen.
  • Træning og uddannelse af vores kunder og partnere gennem afholdelse af kurser og on-site træning.
  • Løbende support og service til kunderne.

Din hverdag bliver fleksibel og alsidig, da den i høj grad styres af vores kunder og deres behov. Du får her et selvstændigt job med en stor grad af frihed under ansvar og mulighed for at opbygge og udvikle en solid faglig kompetence inden for området.

Det kræver at du har en teknisk baggrund og lyst til at hjælpe andre med at få gode løsninger. Derfor kan tilgangen til jobbet være mange.
Vi forventer at du har en uddannelse som f.eks. energiteknolog, elektriker, maskinmester, automatiktekniker, elektronikfagtekniker, VVS’er, eller du har arbejdet med energimanagement, og har gode evner indenfor teknisk fejlsøgning, og lyst at formidle dine resultater til kunde og partnere.

Vi vægter tre ting hos alle vores kollegaer: positiv indstilling, modet til at tage ansvar og evnen til overblik.

ReMoni tilbyder dig:

En spændende dagligdag i et miljø med fokus på at gøre en positiv forskel for den verden vi er en del af.

Du får:

  • Stor indflydelse på dine opgaver.
  • Gode muligheder for fleksibel arbejdstid.
  • Positiv atmosfære med fokus på at finde optimeringsmuligheder og løse problemer.
  • God løn.
  • Mulighed for frokostordning, medarbejderaktier mv.

Spørgsmål:

Du er velkommen til at kontakte Ole på tlf. 30 296 296 eller skrive til job@remoni.com.

Praktisk:

Når du ikke er ude hos kunderne, forventer vi at du har din gang på kontoret i Skanderborg – nær Aarhus og E45. Du tilbydes en mulighed for at arbejde i en unik virksomhed med stor vækst. Organisationsstrukturen er flad med hurtige beslutningsprocesser og en innovativ dagligdag. Er du interesseret, så send en motiveret ansøgning og vis os hvad du duer til. Det gør du på job@remoni.com.

Mærk din ansøgning ”GreenTech_1120”.
Vi arbejder ikke med en fast ansøgningsfrist, men kalder løbende ind til samtale.

Om ReMoni A/S:

Vores mission er at eliminere spild af energi, produktion og CO2.
Ressource Monitorering er vores bidrag i klimakampen.
Det er vores grundlag – og det er vores navn.

 

ReMoni er en særdeles solid virksomhed, med 20 ansatte indenfor udvikling, salg og marketing.

 

Vi leverer ressourcemonitorering for at optimere energiforbrug og produktion.

ReMonis formål er at spare ressourcer på en let og intelligent måde – med minimale omkostninger. Det begyndte med opfindelsen af en helt ny form for clamp-on sensorer til at løse problemet. Sensorerne er unikke, fordi de kan måle energi og flow fra ydersiden af eksisterende kabler og rør.

 

Vores mål er at:

+ Spare energi og vand ved at lokalisere problemerne i bygninger og produktion.

+ Eliminere spild og sikre stabil drift, ved at identificere apparater, der ikke kører optimalt.

+ Sikre fair fakturering af bæredygtig energi og vand vha. prisvenlig monitorering.

Med vores teknologi vil vi bevise, at vi kan bekæmpe den globale klimakrise og endda spare penge på det. Vores initiativer tager udgangspunkt i FN’s 17 verdensmål for bæredygtig udvikling.

 

Læs mere på www.remoni.com

Avoid unnecessary waste

Prevent pumps and expensive machines from running nonstop

Imagine a classic production setting. The vibe is good but busy and the building’s many employees and technical installations are working side by side. During the working hours the production runs smoothly, but during weekends and overnight no one knows if it is actually on or off.

In many buildings aggregates are running day and night. If you get an overview, you can influence the hidden consumption based on data. 

 

Avoid additional bills on energy consumption easily
– ensure idling when the production is not running

To avoid waste, you need to know when the production is running. Ideally you should also be able to point out the dysfunctional units. When it comes to waste reduction, an overview is your best tool – it can both help you improve your business and bottom line.

Here come our 3 best ideas for waste reduction.

– Check up on your pumps

Enormous amounts of district heating are used daily, activating pumps of all kinds. An optimal cooling is equal to minimal waste, and this helps you save money on energy – now and not at least on a long-term scale.

Return water cooling is the first key element when it comes to avoiding unnecessary extra costs. By returning correctly cooled water the circulation pump needs to manage and distribute a smaller amount of water. Hereby, oversteering by users can be avoided – with minimal wear and operation costs as the result.

Find our elaborated advice about return water cooling here.

Save money on pumps

– Turn off your idling engines

Scale down the unintended consumption and save resources. Key: The CTS systems.

Management units such as CTS systems enable automation and operation benefits. But often they generate errors due to lacking checkups on the settings. An operation checkup is not cheap, but continuing without it can turn out quite expensive as well.

We advise you to check up on your idling installations.
Start asking yourself these 3 questions:

  • Do you have pumps or other technical installations running outside your operation hours?

  • Could anything in your building easily be turned off in stead of being on standby overnight?

  • Do you have consumption during weekends and holidays?


– Improve the performance with PowerMoniMain

PowerMoniMain has multiple options for usage. Metering this exact gives you a detailed overview so you can easily detect and react on unintended operation.

If your units are on at night, during weekends or at other unnecessary times, it will be indicated on your dashboard. The dashboard is shown in the cloud-based programme ReCalc or ReCalc MoniTor and displays your data registered by PowerMoniMain. You can find more about ReCalc and ReCalc MoniTor here.

 

– Eliminating CO2-emmision 

We invite you to consider our three advises because eliminating CO2-emmision is our mission. 

Besides, the society is favorizing companies with a sustainable profile and the demands go far beyond the actual product. The best argument to choose sustainability is saving the natures limited resources. Nevertheless, the strongest arguments seems to be the ones focusing on the sustainbility’s great economic potential.  

Understand the basics of AI

AI ReMoni

Most people know that the term ”AI” is short for ”artificial intelligence”

AI is a true buzzword like the terms IoT and Industry 4.0 – and it is a term many tend to get insecure about the actual meaning of. Here we give you an explanation you can understand.

 

An extension of the human intelligence

Overall, the purpose of artificial intelligence was to serve as an extension of the human intelligence. AI technology has become possible thanks to machine learning and a great variety of algorithms.

These algorithms enable the AI to recognize appearance in smartphones face recognition, point out routes in GPS navigation and predict moving patterns in digital chess games.

Overall, artificial intelligence was created to serve as an extension of the human intelligence. 

 

Two types of AI

– with examples you can understand

Artificial intelligence is divided into two types:

  • General AI
  • Narrow AI

The general AI’s work is related to data learning – in relation to logic or language. This is the type of AI behind for example GPS navigation and interactive robots used in the production in many manufactories.

On the other hand, the work of the narrow AI is related to data learning – in relation to recognition. This AI-based feature is based on classification and recognizes everything from forms to complex patterns. This AI is for example used to recognize personal appearance in security systems in buildings and face appearance in smartphones. 

To sum it up:

General AI = data learning regarding logic or language

Narrow AI = data learning regarding recognition


AI consists of algorithms

If you are employed in the field of manufacturing, you should give innovative AI a chance. Especially in the field of building operation and production, AI is often worth large amounts of money.

The function of an algorithm is to process a certain amount of data – often called big data – and thereby understand and remember how different data is related. 


An example of an AI-based solution

ReMoni’s solution for energy savings is based on narrow AI. When we help companies save energy, the AI’s algorithms focus on pattern recognition and knowledge about how two data set are related.

Since AI consists of multiple algorithms, it can register if a defect might occur or a pattern should change. This has become possible thanks to the algorithm’s knowledge of how a certain installation is usually operating.

Two related data set

For further understanding, ReMonis temperature sensor HeatMoniSpot could make a concrete example. Placed outside water pipes, with one probe monitoring the temperature inside the water pipes and the other monitoring the room temperature, it collects two related data set.

Two data set are continuously registered and sent from sensor to ReCalc.

Here you can keep an eye of the relation between the two data set – and should you be busy when an error occurs, the AI based system will instantly let you know with an AI-based alarm.

_______

Note: This explanation is based on leakage from water pipes and is just one way to understand the structure beyond AI. In this case the AI is neither located in sensor or gateway but exclusively in the technology behind the cloud-platform ReCalc.

_______

Save money on building management

Use the AI to get insights about temperature, visitor numbers, power consumption or something fourth. AI gives you various ways to save money on building management.

In our society where building management has already been changed by IoT and Industry 4.0, we have to acknowledge that staying openminded for novel technology – and not at least AI – does pay off in the long run.